For guaranteed clear water, ponds and water features need a helping hand. Pressurised filters can be easily incorporated into the supply for a watercourse, waterfall, stream or any water feature. They have the great advantage of being located above or below the water level and can be buried almost completely for discrete installation. With a built-in ultraviolet clarifier and biological action, the pressurised filter really should be a fundamental element in the design and construction of all small ponds and water features.

The integral back-washing feature makes the Filtoclear one of the easiest pressure filters to clean. Simply turn the top valve to the clean position and run the pond pump. Pulling the cleaning lever up and down wrings out the dirt from the sponges while the water back-washes the filter maintaining its biological activity. The dirty water can be piped into a drain or onto the garden where it makes an excellent fertiliser. The Filtoclear 15000 has a reflector that increases the UVC performance by 20%.

Now incorporating the higher capacity Filtoclear 15000, together with the new range of Aquamax ECO filter pumps, these sets provide a quick and easy method of choosing professional quality, ideally matched components, all in one box.

With a cyclone action, high capacity filter canisters and a unique multi-foam layout, cleaning is reduced by three times compared to conventional filters. They also have built-in UVCs and a backwash system for easy cleaning and offer very good value for money.

By combining a Hydratech Torrent pump and a Hydratech Cyclone filter, these sets provide a quick and easy method of choosing good value, ideally matched components, all in one box.

This brand new range from Oase offers a long awaited, multi-functional solution to owners of small ponds of up to 5000 litres. These compact units not only have an integrated bio-core filter and an underwater UVC, they also have a built-in pump which, when used in conjunction with the optional nozzle set (with a telescopic riser and a choice of three nozzles), provides a fountain and filtration all-in-one unit.

For a healthy pond, the quality of the water is crucial. These innovative 'Screenmatic' filters set new standards in outstanding biological filtration coupled with low maintenance. The key to this new design is that before water enters the filter box, it is washed over the Screenmatic sieve which retains any particles over 100 microns in size. This means only lightly polluted water actually reaches the filter sponges, vastly reducing the need for maintenance. The special tool supplied with the filter allows the sponges to be cleaned directly in the filter, with the dirty water being easily emptied using the built-in sludge drain.

These sets provide a quick and easy method of choosing professional quality, ideally matched components. They not only filter out dirt, they also reduce water pollutants by encouraging micro-organisms and the biological filtration process. They come with a highly efficient ECO Aquamax filter pump, an easy to clean Bitron C UVC clarifier and a new generation Biotec Screenmatic filter box, with all components ideally matched for easy selection. Simply add the required length of 38mm (1½") spiral hose, some double wire clips and some filter outlet pipe to complete the system.

These clarifiers use UVC light to eliminate green water. As the water passes through the unit, the UVC light flocculates the green algae, causing it to clump together so that it can be trapped in the filter media. The Bitron C clarifiers are the latest design from Oase and incorporate permanent magnets to prevent calcium deposits and an automatic cleaning system to prevent the build-up of sludge and slime on the quartz glass. They have built-in valves to regulate the flow and the UVC lamps are easy to change without the need for tools.

The Aquamax ECO pumps lead the market in terms of economy. Using Oase's new generation of servomotors, they offer energy savings of up to 40% over conventional pumps. For ease of maintenance, a remote strainer is available as an extra and can be used to collect water from different parts of the pond, thus avoiding areas becoming stagnant. Alternatively connect a skimmer to take water from the top of the pond on one inlet and from the bottom of the pond on the other.

With massive flow rates and low running costs, the Oase Promax filter pump is ideal for the largest watercourse or filtration system. Based around the hugely successful Aquamax range, the Promax offers a unique feature - twin pump motors. These can be turned up and down or switched on or off, independent of each other, using the remote control that is supplied with each pump. This means the flow rate can be precisely adjusted at the touch of a button and watercourses can be turned down to a trickle at night, saving power and money.

This new range of powerful filter and watercourse pumps has been developed specifically for dry installation (outside the pond and below the water level), and are ideal for shallow and more formal ponds where a conventional pump would otherwise be visible. Designed with a large stable base, they are extremely quiet in operation and can cope with particles up to 8mm in size.

The unique design of the Force Hybrid provides two switchable options, adjusting the intake of the pump to either ‘sludge removal’ or ‘multipurpose’. The multipurpose mode draws water through the whole of the cage, offering low intake speeds over a high surface area, which is ideal for watercourses and waterfalls. By switching to sludge removal mode, the intake of the pump is directed towards the floor of the pond, and will suck up solids of up to 8mm, making it ideal for filter systems.

These surface skimmers from Oase clear dirt, leaves, pollen and pollutants from the surface of the pond, preventing the build-up of pollution and keeping the surface crystal clear. They are easy to maintain and have a basket to collect the debris and a floating head that automatically adjusts to the level of water.

This innovative new product from Oase is designed as a stand alone unit. It comes with a built-in re-circulating pump and is suitable for ponds with a surface area of up to 25m². It automatically adapts to the water level in the pond, and includes an injector for oxygenating the water - great for improving pond health and water quality.

When added to the inlet of your filter via any Aquamax ECO pump, these surface skimmers clear dirt, leaves and pollution from the top of the pond. The AquaSkim 40 has a large stable base that is designed to be filled with pebbles, and has automatic level adjustment up to 120mm. The BIOsys skimmer is designed to be built directly into the side of the pond and has an integrated pump chamber to house an Aquamax pump (not included) so it can pump water to a filter.

The New ProfiClear modular filters enable a filtration system to be configured to suit the exact needs of you and your customer. Whether it is used for a koi pool or a large swimming pond, ProfiClear offers the tailor-made solution for clear and healthy water. As the ProfiClear system is made up of a number of separate units, additional modules can be easily added as the pond, fish and filtration requirements grow. Just let us know your requirements and we will be happy to provide prices, help and advice to meet your needs.

These sets provide a quick and easy method of choosing professional quality filtration systems for large ponds, small lakes and swimming ponds. Each set is selected from the range of ProfiClear modules, with all components ideally matched for optimum performance related to the purpose of the pond. The maximum flow rate of a filter module is 12,500 litres per hour, therefore as ponds get bigger the modules are best combined as a double row. This greatly increases the flow rate of the system to a massive 25,000 litres per hour, suitable for even the largest ponds (up to 295,000 litres). Simply choose the best set to match your requirements from the list below.