MDPE pipe is the standard product for bringing high pressure mains water into houses. Its toughness makes it ideal for routing around the garden to create a new water supply, for installing new outside taps and standpipes or as a more durable alternative pipe for underground irrigation systems.

These quick and easy push-fit connectors are the best way to route mains water around the garden. They are small, black and unobtrusive, providing neat and flexible connections for 20mm, 25mm and 32mm MDPE pipe.

Used to isolate the water supply in any part of the garden, these push-fit stopcocks will not corrode and can be sited below ground if fitted in a valve box.

Used to connect 20mm, 25mm or 32mm MDPE pipe to any ½", ¾" or 1" BSP female thread (use PTFE tape to seal the joint).

To connect onto any ½", ¾" or 1" BSP male thread, simply screw on one of these fittings then push any standard elbow, tee or joiner onto the end.

The copper adaptor is used as a simple connector to join MDPE pipe to 15mm or 22mm copper pipe. To install a new outside tap, push a wall plate elbow onto the MDPE pipe and screw it to the wall. Then wrap PTFE tape around the thread on the double-check bib tap and screw it into the wall plate elbow.

These fittings provide a universal connection to any existing water pipe, whatever its size or material, including lead, imperial plastic and galvanised steel.